Table 2-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading Option Description
Slot Settings Enables you to set the following options for the Mini PCIe slots:
●
Slot 1 Option ROM Enabled/Disabled
●
Slot 2 Option ROM Enabled/Disabled
●
Slot 3 Option ROM Enabled/Disabled
AMT
Configuration
Lets you set the following AMT (Intel Active Management Technology) configuration options:
●
AMT (Enabled/Disabled)—Allows for remote discovery, repair and protection of networked
workstations. Enabling the AMT function also enables the Network Controller (required for
AMT to function correctly).
●
Unconfigure AMT/ME (Disabled/Enabled) 2—Restores AMT/ME defaults. When you save
and exit after enabling this option, you will be prompted to complete the process upon
restart. A Setup Password (even if one is set) does not need to be entered to complete the
process.
NOTE: Information about Intel AMT can be found at www.intel.com.
●
WatchDog Timer (Enabled/Disabled)—OS and BIOS WatchDog Timers can be set
independently (in minutes):
◦
OS WatchDog TimerTimer—Sets the OS WatchDog Timer
◦
BIOS WatchDog Timer—Sets the BIOS WatchDog Timer
1
Available on selected models
2
These options should be used by advanced users only
22 Chapter 2 System management
To Next Page
Loading...
