HP Z1

Saving and printing information in HP Vision Diagnostics
You can save the information displayed in the HP Vision Diagnostics Survey, History and Errors tabs to
removable media. You cannot save to the hard drive. The system automatically creates an HTML file
that has the same appearance as the information displayed on the screen.
1. Insert removable media.
2. Click Save in the bottom on any of the Survey, History or Errors tabs. The three log files are saved
regardless of where the Save button is clicked.
3. Select the removable media drive and click Save.
NOTE: Do not remove the media until a message indicates the files have been written.
4. Print the desired information HTML file.
NOTE: To exit HP Vision Diagnostics, click Exit Diagnostics at the bottom of the screen. Be
sure to remove the removable media.
82 Chapter 4 Diagnostics and troubleshooting