4 Removal and replacement preliminary
requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Case utility tool or other at-bladed, plastic tool
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P0 screw driver
●
Phillips P00 screw driver
●
Torx4 screw driver
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the tablet, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
24 Chapter 4 Removal and replacement preliminary requirements
To Next Page
Loading...
Need help?
General
