2010-10-22 10:35:36 PDT Created task.
2010-10-22 10:35:36 PDT Updated Executing "upgradecage -a -f" as 0:12109
2010-10-22 10:35:36 PDT Errored upgradecage: Invalid option: -f
vlun
• Displays inactive Virtual LUNs (VLUNs) and those which have not been reported by the host agent
• Reports VLUNs that have been configured but are not currently being exported to hosts or host-ports
• Displays when too many VLUNs have been created
Format of Possible vlun Exception Messages
vlun vlun:(<vvID>, <lunID>, <hostname>)"Path to <wwn> is not is not seen by host"
vlun
vlun:(<vvID>, <lunID>, <hostname>) "Path to <wwn> is failed"
vlun host:<hostname> "Host <ident>(<type>):<connection> is not connected to a port"
vlun -- "<count> active VLUNs exceeds the supported limit of <max count>"
vlun Example
Component ---------Summary Description--------- Qty
vlun Hosts not connected to a port 1
Component -----Identifier----- ---------Detailed Description--------
vlun host:cs-wintec-test1 Host wwn:10000000C964121D is not connected to a
port
vlun
Suggested Action
Check the export status and port status for the VLUN and HOST with CLI commands such as:
• showvlun
• showvlun -pathsum
• showhost
• showhost -pathsum
• showport
• servicehost list
For example:
94 vlun
To Next Page
Loading...
