HPE 3PAR StoreServ 7000 Storage

Service Processor LEDs front panel
LED/Port function Status Meaning
Amber solid Service Processor in standby, power still on
Off Power cord not attached, no power supplies
installed, or power failure
2
Health Green solid Service Processor on and health normal
Amber flashing Service Processor health degraded
Red flashing Service Processor health critical
Off Service Processor power off
3
NIC status Green solid Link to network
Green flashing Network activity
Off No network link/activity
4
UID/Service Blue solid Active
Blue flashing Either remote management, firmware upgrade in
progress, or iLO manual reboot sequence initiated
Storage system status LEDs
Storage system status LEDs
The HPE 3PAR StoreServ 7000 Storage Controller Node Enclosures and Drive Enclosures have system
status LEDs at the front, left corner of the enclosures.
Figure 84: LEDs on the left Ear Cap (bezel), SFF enclosures front view
138 Storage system status LEDs