EasyManuals Logo

HPE G2 R6000 User Manual

HPE G2 R6000
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Installing the mounting rails
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
If it is a single-rack installation, the stabilizing feet are attached to the rack.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
Procedure
1. Extend the brackets to the appropriate length.
2. Insert screws through the rack into the mounting rail and the front and back of each mounting bracket.
Installing the UPS
Before installing the UPS, review and observe all warnings in Precautions.
WARNING: A risk of personal injury or damage to the equipment exists. Uneven loading of equipment in
the rack might cause the rack to become unstable. Install the heavier components first, and then
continue to populate the rack from the bottom to the top.
Procedure
1. Install the mounting rails.
2. With one person on each side of the carton, lift the chassis and lower it to the floor in front of the rack.
3. Install the mounting ears on the chassis using the screws provided.
Installation 15

Table of Contents

Other manuals for HPE G2 R6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE G2 R6000 and is the answer not in the manual?

HPE G2 R6000 Specifications

General IconGeneral
Form FactorRack-mountable
Battery TypeSealed Lead-Acid (SLA)
Nominal Output Voltage230 V
Frequency50/60 Hz
Input Voltage200 V AC to 240 V AC
Output Voltage200 V AC to 240 V AC
InterfaceUSB
Capacity6000 VA
Battery RuntimeVaries based on load (typically 5-15 minutes at full load)

Related product manuals