HPE G2 R6000 User Manual

Specifications
UPS physical specifications
Parameter Value
Height 13.0cm (5.1in)
Depth 72.13cm (28.4in)
Width 43.9cm (17.3in)
Weight 48kg (106lb)
ERM physical specifications
Parameter Value
Height 13.0cm (5.1in)
Depth 72.13cm (28.4in)
Width 43.9cm (17.3in)
Weight 68kg (150lb)
UPS input specifications
UPS model Utility voltage
frequency (Hz)
Available settings
utility voltage (VAC)
Branch circuit rating
(A)
Line cord
G2 R5000 4out
NA/JPN
50/60 200/208/220/230/240 30A
Nondetachable
power cord with
NEMA L6-30 plug
G2 R5000 5out
NA/JPN
50/60 200/208/220/230/240 30A Nondetachable
power cord with
NEMA L6-30 plug
G2 R6000 INTL 50/60 200/208/220/230/240 32A Nondetachable
power cord with
IEC60309 3-pin 32A
IP44 plug
UPS output specifications
UPS model Load segment Output receptacles
G2 R5000 4out
NA/JPN
1 2 x L6-20R/2 x L6-30R
G2 R5000 5out
NA/JPA
1 4 x C19, 1x L6-30R Pigtail
G2 R6000 INTL 2 4 x C13/4 x C19, 1x IEC 32A Pigtail
Specifications 35

HPE G2 R6000 Specifications

General

Form Factor	Rack-mountable
Battery Type	Sealed Lead-Acid (SLA)
Nominal Output Voltage	230 V
Frequency	50/60 Hz
Input Voltage	200 V AC to 240 V AC
Output Voltage	200 V AC to 240 V AC
Interface	USB
Capacity	6000 VA
Battery Runtime	Varies based on load (typically 5-15 minutes at full load)