HPE G2 R6000 User Manual

43 pages

To Next Page

To Previous Page

4. With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails.

5. Attach the chassis to the rack using the supplied screws.

Connecting the battery

Procedure

1. Remove the bezel from the front of the UPS.

2. Remove the two screws.

16 Installation

Other manuals for HPE G2 R6000

Need help?

Do you have a question about the HPE G2 R6000 and is the answer not in the manual?

General

Form Factor	Rack-mountable
Battery Type	Sealed Lead-Acid (SLA)
Nominal Output Voltage	230 V
Frequency	50/60 Hz
Input Voltage	200 V AC to 240 V AC
Output Voltage	200 V AC to 240 V AC
Interface	USB
Capacity	6000 VA
Battery Runtime	Varies based on load (typically 5-15 minutes at full load)