16. Using an alcohol wipe to remove the existing thermal grease from the processor and heatsink.
Allow the alcohol to evaporate before continuing.
Installing the heatsinkInstalling the heatsink
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-30 Torx screwdriver available.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. CAUTION:CAUTION:
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED.THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED. Any
damage to them might require replacing the system board.
Do not touch the pins on the processor socket and the processor.
To Next Page
Loading...
