HPE ProLiant DL320 Gen11 - Mechanical Specifications; Power Supply Specifications

System performance during standard operating support might be reduced if operating above 30°C (86°F).
Extended ambient operating supportExtended ambient operating support
For approved hardware configurations, the supported system inlet range is extended to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every
574 ft) above 900 m (2,953 ft) to a maximum of 3050 m (10,000 ft).
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2953 ft) to a maximum of 3,050 m (10,000 ft).
The approved hardware configurations for this system are listed in the Extended Ambient Temperature Guidelines for Gen11 HPE ProLiant
servers:
https://www.hpe.com/support/ASHRAEGen11https://www.hpe.com/support/ASHRAEGen11
Mechanical specificationsMechanical specifications
SpecificationSpecification ValueValue
SFFSFF —
Height 4.28 cm (1.69 in)
Depth 60.52 cm (23.83 in)
Width 43.46 cm (17.11 in)
Weight, minimum 12.00 kg (26.45 lb)
Weight, maximum 16.7 kg (36.81 lb)
4 LFF4 LFF —
Height 4.28 cm (1.69 in)
Depth 66.47 cm (26.17 in)
Width 43.46 cm (17.11 in)
Weight, minimum 13.20 kg (29.10 lb)
Weight, maximum 17.70 kg (39.02 lb)
12 LFF12 LFF —
Height 4.28 cm (1.69 in)
Depth 99.51 cm (39.18 in)
Width 43.46 cm (17.11 in)
Weight, minimum 18.60 kg (41.00 lb)
Weight, maximum 29.60 kg (65.23 lb)
GPU denseGPU dense —
Height 4.28 cm (1.69 in)
Depth 77.42 cm (30.48 in)
Width 43.46 cm (17.11 in)
Weight, minimum 14.70 kg (32.41 lb)
Weight, maximum 20.90 kg (46.08 lb)
Power supply specificationsPower supply specifications
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 257