HPE ProLiant DL320 Gen11 - Removing and Replacing the 4 LFF Drive Backplane

13. Remove the 8 E3.S drive backplane.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the 4 LFF drive backplaneRemoving and replacing the 4 LFF drive backplane
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 71