HPE ProLiant DL320 Gen11 - System Maintenance Switch Descriptions

ItemItem DescriptionDescription
1 Serial port cable connector
2 Internal USB 2.0 port
3 Primary riser connector
4 Video (VGA) cable connector
5 Storage controller backup power connector
6 System battery
7 MCIO port 1
8 MCIO port 2
9 MCIO port 3
10 MCIO port 4
11 GPU Auxiliary power connector
12 GPU riser power connector
13 Front I/O connector
14 SATA sideband connector
15 Internal USB 3.2 Gen1 port
16 Optical drive connector
17 Drive box 5 power connector
18 Drive box 3 power connector
19 Drive box 1 power connector
20 Media bay power connector
21 Energy pack connector
22 Chassis Intrusion Detection connector
23 M.2 module connectors
24 Switch board sideband connector
25 NS204i-u power connector
26 SATA 6 Gb/s port
27 x8 slimSAS port 1
28 Display port cable connector
29 Secondary riser connector
X System maintenance switch
This component is used in the 4 SFF and 8 E3.S drive configurations.
SubtopicsSubtopics
System maintenance switch descriptionsSystem maintenance switch descriptions
DIMM label identificationDIMM label identification
DIMM slot numberingDIMM slot numbering
Heatsink and processor socket componentsHeatsink and processor socket components
System maintenance switch descriptionsSystem maintenance switch descriptions
1
1
1
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 194