WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause ESD.
2. Power down the server.
3. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5.
Remove the air bale.
6. Remove the fan cage.
7. Remove the blank.
8.
Install the drive cage:
a.
Remove all drives and drive blanks.
b. Install the drive cage.
Hardware options installation
71
To Next Page
Loading...
