Orient the server back to tower mode.
Install the server into the rack.
20. If removed, install the front bezel .
21. Connect all peripheral cables to the server.
22. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
23. Power up the server.
ResultsResults
The installation is complete.
Memory optionMemory option
The server has 16 DIMM slots supporting HPE DDR5 SmartMemory (RDIMM) .
The arrow points to the front of the server.
SubtopicsSubtopics
HPE SmartMemory speed and population informationHPE SmartMemory speed and population information
DIMM installation guidelinesDIMM installation guidelines
Installing a DIMMInstalling a DIMM
To Next Page
Loading...
