Trusted Platform Module 2.0Trusted Platform Module 2.0
The Trusted Platform Module 2.0 (TPM) is a hardware-based system security feature that securely stores artifacts used to authenticate the
platform. These artifacts can include passwords, certificates, and encryption keys.
The TPM 2.0 is embedded on the server system board.
The TPM 2.0 is supported with specific operating system support such as Microsoft Windows Server 2012 R2 and later. For more
information about operating system support, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qshttps://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive Encryption feature, see the Microsoft
website (https://www.microsoft.comhttps://www.microsoft.com).
SubtopicsSubtopics
Trusted Platform Module 2.0 guidelinesTrusted Platform Module 2.0 guidelines
BitLocker recovery key/password retention guidelinesBitLocker recovery key/password retention guidelines
Trusted Platform Module 2.0Trusted Platform Module 2.0 guidelines guidelines
CAUTION:CAUTION:
Always observe the TPM guidelines in this section. Failure to follow these guidelines can cause hardware damage or
halt data access.
If you do not follow procedures for modifying the server and suspending or disabling the TPM in the OS, an OS that is
using TPM might lock all data access. This includes updating system or option firmware, replacing hardware such as the
system board and drives, and modifying TPM OS settings.
Changing the TPM mode after installing an OS might cause problems, including loss of data.
Hewlett Packard EnterpriseHewlett Packard Enterprise SPECIAL REMINDER: SPECIAL REMINDER: Before enabling TPM functionality on this system, you must ensure that your intended use
of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable.
To Next Page
Loading...
