ItemItem LEDLED StateState DefinitionDefinition
1 Fault/Locate Solid amber This drive has failed, is unsupported, or is invalid.
Solid blue The drive is operating normally and being identified by a
management application.
Flashing amber/blue (1
flash per second)
The drive has failed, or a predictive failure alert has been received
for this drive. The drive has also been identified by a management
application.
Flashing amber (1 flash per
second)
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
Off The drive is operating normally and not being identified by a
management application.
2 Online/Activity Solid green The drive is online and has no activity.
Flashing green (1 flash per
second)
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
Flashing green (4 flashes
per second)
The drive is operating normally and has activity.
Off The drive is not configured by a RAID controller or is a spare drive.
Drive bay numberingDrive bay numbering
CAUTION:CAUTION:
When a server is purchased without any drive installed, some drive bays might be empty while other drive bays might be
populated with drive blanks. To maintain proper system cooling, do not operate the server without a drive or a drive blank
installed.
SubtopicsSubtopics
LFF non-hot-plug drive bay numberingLFF non-hot-plug drive bay numbering
LFF hot-plug drive bay numberingLFF hot-plug drive bay numbering
SFF hot-plug drive bay numberingSFF hot-plug drive bay numbering
Mixed hot-plug drive bay numberingMixed hot-plug drive bay numbering
LFF non-hot-plug drive bay numberingLFF non-hot-plug drive bay numbering
This server supports up to 8 SATA drives in two LFF non-hot-drive boxes.
Tower orientationTower orientation
To Next Page
Loading...
