HPE SN6500B

1. Trunking group 1: Ports 0–7 2. Trunking group 2: Ports 8–15
3. Trunking group 3: Ports 16–23
Figure 8: HPE SN3000B 16Gb FC Switch trunking groups example
For more information about ISL Trunking, see the Fabric OS 7.0.x Administrator's Guide for the firmware
version you are running.
Hardware options
For more information on optional hardware kits, see Optional hardware kits.
NOTE:
For the latest information on supported hardware components, see the product QuickSpecs
available on the Hewlett Packard Enterprise website.
SFP transceivers
Table 4: SFP transceiver options
Option Part number
8 Gb Transceivers 8Gb Shortwave B-series FC SFP+
8Gb LW B-series 10km FC SFP+
B-series 8Gb LW 25km FC SFP
16 Gb Transceivers B-series 16Gb SFP+ Short Wave Transceiver
16 Gb Long Wave
Transceivers
16Gb Long Wave B-series 10km FC SFP+ 1 Pack
HPE StoreFabric SN4000B SAN Extension Switch
This section provides an overview of the StoreFabric SN4000B SAN Extension Switch. It describes
platform capabilities and components, and the physical layout of the switch.
Overview
The StoreFabric SN4000B SAN Extension Switch is a platform for FCIP that enables transmission of
Fiber Channel data over long distances through IP networks by wrapping Fiber Channel frames in IP
20 Hardware options