Procedure
• Naming the library
• Partitioning a library with two tape drives into two logical libraries
• Configuring IPv6 networking
• Enabling and configuring SNMP network management
• Setting up network time synchronization with NTP
• Configuring the CommandView TL management station for TapeAssure
• Setting up email event notification.
• Configuring failover (LTO-5 and LTO-6 FC only)
• Configuring use of encryption.
The MSL Encryption Kit provides secure, redundant storage of encryption keys for LTO-4 and later
generation tape drives. If you are using the Encryption Kit with this library, follow the instructions in the
kit to install and configure the Encryption Kit. The Encryption Kit is ordered separately. For information
about the kit, see: http://www.hpe.com/storage/tape.
24 Installing the library
To Next Page
Loading...
