FC53-Li/FC53-Lc/FC53-Ri/FC53-Rc User Manual
Rev.2.0
1.3 Type of Printer
FC53-Li/FC53-Ri Intermittent Printer
This model is used with intermittent packaging equipment and will print with the materials
fixed.
The FC53-Li/FC53-Ri printer has a print area of 53 mm x 75 mm in this mode and a print
speed of 40 to 600 mm / s.
During the stationary period when the packaging material is in a fixed state, the
information can be printed by moving the print head.
The FC53-Li/FC53-Ri printer can print text and barcodes in any position in the printing area
with a width of 53 mm and a length of 75 mm in the intermittent mode.
FC53-Lc/FC53-Rc Continuous Printer
FC53-Lc/FC53-Rc printer is specially designed for printing on a continuously moving
substrate.
FC53-Lc/FC53-Rc printer in this mode has a print area of 53 mm x 100 mm and a print
speed of 40 to 600 mm / s. When in continuous motion mode, place the print head in a
fixed position and accelerate the ribbon to match the substrate speed.
Use an encoder to determine the speed of the printed material.
This makes it an ideal coding device for continuous dynamic form filling, sealing equipment
and horizontal moving packaging materials.
FC53-Lc/FC53-Rc printer can print text and barcode at any position in the printing area with
width of 53 mm and length of 100 mm in this mode.
FC53-Lc/FC53-Rc uses a thermal print head and a thermal ink ribbon to print information
onto materials held against a print roller.
To Next Page
Loading...
Need help?
General
