HPRT FC53-Li User Manual

FC53-Li/FC53-Lc/FC53-Ri/FC53-Rc User Manual
Rev.2.0
55
In "Administrator Mode", you can access the following options: synchronizer setting, ribbon
setting, system clock adjustment, restore factory setting, IP setting.
● Synchronizer Setting（Only support continuous printers FC53-Lc/FC53-Rc）: You can set the
type, direction, resolution, and diameter of the synchronizer.
Note:
Synchronizer type setting: internal / external—single-channel pulse / external-dual-channel
pulse
Synchronizer direction setting: clockwise / counterclockwise
Synchronizer resolution setting: minimum = 1 pulse / revolution; maximum = 600 pulses /
revolution
Same device diameter setting: minimum = 10 mm; maximum = 500 mm

HPRT FC53-Li Specifications

General

Brand	HPRT
Model	FC53-Li
Category	Printer
Language	English