MINIKEY User Manual Add content to your layout
Page 25 of 66 HSA SYSTEMS
Text object with counter
Enter parameters. Parameters are described below.
Press green check mark to finish.
Parameter list(text object with counter)
Property Description
Value Current value at print mode start
Digits Number of digits shown.
The maximum number of digits is 10.
Minimum value The minimum value displayed in the counter. Minimum value is −2,147,483,648, after
which it will display maximum value.
Maximum value The maximum value displayed in the counter Maximum value is +2,147,483,647, after
which it will display minimum value.
If the maximum value exceeds the selected number of digits, only the last digits will be
displayed. Example: Digits = 3. Max = 1000. Counter will display 998, 999, 000, 001.
Lead-in What should be in front of current value.
Select either:
Zero (displays 000123)
Space (displays 123)
Nothing(displays123)
Step value Counter increments. With a setting of 3, the counter will display 0,3,6,9,12.......
Step count How many times the counter is repeating. This is independent from the message, repeat,
set in the layout settings. If step count has been set to two, print will be
99,99,100,100,101,101.
If layout repeat has been set to two and the counter repeat has been set to off, the print
will be[99,100] [101,102] (Sensor signals enclosed in [ ] )
Reset step on print start Select this option to reset step count when you enter print mode.
Reset on print start Continue counting at print mode start, or reset to a value
Reset value The value to start from if “Reset on print start” is selected. May be equal to or different
from minimum.
To Next Page
Loading...
Need help?
General
