HSAJET MiniKey User Manual

MINIKEY User Manual Add content to your layout
Page 35 of 66 HSA SYSTEMS
Prompts
Prompts is not content by itself, but a way to force the user to input data at print start. Typically
used where the designer does not know the content of this data in advance - or where it changes
regularly.
Setup prompts
Press the prompt icon at the bottom of the screen. Navigate to the icon using space
and arrow keys.
Edit prompt parameters. Parameters are described below.
Press green check mark to continue.
Prompt parameters:
Property Description
Active
To activate the prompt, select on.
Requires validation When this option is set to on, the prompt cannot be accepted before a user with
"validator" status has entered his password.
Please refer to the chapter on user accounts.
Question Enter a question to display, for instance
"Enter batch no ?"
Mask If you enter N, only numbers will be accepted as input. If you enter X, only characters
will be accepted.

HSAJET MiniKey Specifications

General

Brand	HSAJET
Model	MiniKey
Category	Controller
Language	English