MINIKEY User Manual How to change system settings
Page 53 of 66 HSA SYSTEMS
Change network settings
Select "network" in the system menu. Shortcut “3”
Network settings allows you to configure your MINIKEY for communication with the
local area network.
Parameter list
Property Description
Network Enable or disable network option.
Network name Used to identify the unit, when connected to the Communicator software.
DHCP If this option is set to on, theMINIKEY will search the network for a DHCP server, to
automatically obtain an IP address, netmask and gateway. To add an IP address
manually select "off".
IP address Standard settings for IP access. Works just like with a PC network. Typical settings
are:
IP = 192.168.1.10
Netmask = 255.255.255.0
Gateway = 192.168.1.1
Netmask
Gateway
Port This port is used when the MINIKEY is operated by remote control.
File port Port for sending files to the machine
Network address
administrators to allow or disallow the MINIKEY access to a network, or to assign a
specific IP address to a certain machine.
To Next Page
Loading...
Need help?
General
