Need help?Do you have a question about the HSD SM 137 D and is the answer not in the manual?
Overview of the manual's purpose and general guidance for correct installation.
Defines the target audience and manual's role in product installation and maintenance.
Explains special attention symbols like Danger, Caution, and Information.
Lists all documentation accompanying the product for proper use.
Details the product's compliance with applicable EU Directives and harmonized standards.
Explains how to identify the product and its manufacturer using serial numbers and plates.
Provides guidelines for requesting additional documentation, services, or parts.
Outlines the terms, conditions, and duration of the product warranty.
General rules and precautions for safe installation, use, and maintenance of the product.
Specific safety advice to be followed before and during maintenance operations.
Identifies potential hazards and prohibitions related to improper handling and use.
Highlights specific risks, such as high surface temperatures, that remain after safety measures.
Describes safety signs on the product and the importance of their legibility and presence.
Introduces the servo-motor and its intended uses in CNC machines.
Provides a visual overview and identifies the main functional parts of the servo-motor.
Details how the manufacturer and product are identified on the unit's label.
Refers to specific signs related to safety and mandatory information.
Advises on safe practices for lifting and handling the product during installation.
Indicates where to find information on the product's physical size and weight when packed.
Describes methods of transport and protective packing used for the product.
Provides steps for safely opening the package and removing the product.
Specifies environmental conditions and methods for storing the product.
Covers preliminary checks, factory services, and environmental conditions.
Details mechanical mounting and electrical wiring procedures.
Covers Fieldbus interfaces (E-NETX, CANopen, RS-485) and dip-switch settings.
Includes running-in, post-installation checks, diagnostics, and environmental conditions.
Procedures for periodic cleaning to maintain product efficiency and longevity.
Covers power, voltage, current, dimensions, weight, and shaft details.
Information on reducer characteristics, stages, and control method parameters.
Includes torque/power curves, fieldbus specs, and S1 continuous service conditions.
Table showing compatibility of new versions with older, discontinued models.
Specific dip-switch settings required for replacing previous servo-motor versions.
Contact details and overview of customer support services worldwide.
To Next Page
General