4 Transport, packing, unpacking, storage
28
HSD S.p.A. © - h0103k00a.fm291119
4.3 Transport and packing
The product can be shipped using various forms of transport (road, rail, sea, air), and the method
is usually agreed with the customer at the time of purchase.
The product is shipped protected by a VCI (Volatile Corrosion Inhibitor) plastic cover and knock-
proof material, and packed in a cardboard box.
In some cases the product can be packed as requested by the customer.
The following environmental values must be respected during transportation:
4.4 Unpacking
Verify the integrity of the packing before opening.
Open the box and remove the product manually, holding it by the motor or body.
Do not lift the product by its wires.
All the packaging scrap is to be disposed of according to the material and in compliance with
current regulations in the country of use.
4.5 Storage
If the product is to be placed in storage, it must be stored with its original packing.
The packed product must be stored in a place that is protected from bad weather (rain, water,
humidity).
The following environmental values must be respected during storage:
Transport temperature -25C to +70C (-13F to +158F)
Non-condensing relative humidity max 95% at 40C
Storage temperature -25C to +55C (-13
F to +131F)
Relative humidity 5% - 95%
To Next Page
Loading...
General