2 Safety information
HSD S.p.A. © - h0115k00a.fm291119
19
2.5 Signs fixed to the product
The signs on the product are shown below.
The signs fixed to the product must never be removed for any reason whatsoever.
The signs must be clearly legible.
Damaged signs should be replaced (request new ones from the manufacturer).
Make sure the information plates are clearly legible. If this is not the case, replace
them with new ones in the same positions.
DANGER, HOT SURFACES! High temperature component, risk of burning. Wear
suitable protective clothing.
USER MANUAL! It is compulsory to read the whole user manual
before performing any operations.
To Next Page
Loading...
General