HT EASYTEST - Anomalous Situations

EASYTEST-COMBI519
EN - 31
6.4.1. Anomalous situations
1.
If the instrument detects a voltage higher than 3V at its
terminals, it does not perform the test, it emits a prolonged
acoustic signal and displays a screen like the one to the
side.
Lo 15/10 – 18:04
R
Itest
=
=
- - - 
- - - A
V i n > 3 V
0.500 
Conn.
MAN
Lim.
INFO
MODE
2.
If the instrument does not detect the EQUITEST
accessory, it displays a screen like the one to the side.
Check the connections with the accessory.
Lo 15/10 – 18:04
R
Itest
=
=
- - - 
- - - A
A c c e s s o r y n o t d e t e c t e d
0.500 
Conn.
MAN
Lim.
INFO
MODE
3.
The instrument shows on the display the message "NOT
OK" in case of a positive result (value lower than the set
limit threshold) but with test current lower than 10A, as
indicated in the screen like the one to the side.
Lo 15/10 – 18:04
R
Itest
=
=
0.119 
8.05 A
NOT OK
0.500
Conn.
MAN
Lim.
INFO
MODE