104 Securing and Managing the Mobile Computer
Press N to continue with the hard disk recovery process. If you press Y,
the hard disk recovery utility is terminated.
4. The next message prompts you whether or not to rebuild the MBR
(Master Boot Record) data:
Recovery process is starting .....
The process will delete all data on the hard drive.
Do you want to terminate the process? (Y/N) N
Do you want to rebuild the MBR (Master Boot Record) data? (Y/N)
If, aside from drive C, you have created other partitions in the
hard disk and you want to keep them, press N. If you press Y, your
partitions will be deleted.
5. A confirmation message then prompts you whether or not to
continue. Press Y to start the hard disk recovery process. If you press
N, the hard disk recovery utility is terminated.
6. After the recovery process is complete, slide and hold the POWER/
HOLD switch for about four seconds to shut down the Mobile
Computer.
5.3 Using the Fingerprint Sensor and VITAKEY™
Your Mobile Computer features a fingerprint sensor, which you will find on
the lower left side of the touch panel. Windows Vista® is preinstalled with
the VITAKEY™ fingerprint software which provides an extra layer of data
security to protect your Mobile Computer and personal information.
The VITAKEY fingerprint software includes fingerprint authentication
to access user credentials for logging on to the Mobile Computer and
accessing files. Other functionality includes centralized password
management and quick application launching.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
