60 Operating in SnapVUE™
Set up a device password
You can keep your data more secure by requiring a password when
SnapVUE is started or reset.
To set a device password
1. Tap Settings on the Home screen and then tap Lock.
2. On the Password tab, select the Prompt if device unused for check
box, and select how long your device must be idle before a password
is required in the time selection box.
3. In the Password type box, select the type of password you would like
to use.
4. Enter the password in both the Password and Confirm boxes.
5. Tap OK. The next time you switch to SnapVUE, you will be prompted
to enter your password.
Notes • If you entered a hint, the hint will be displayed after the wrong password
is entered five times.
• Each time a wrong password is entered, the device response time gets
longer until the device appears to be not responding.
To Next Page
Loading...
