58 Operating in SnapVUE™
3.1 First-time Use
SnapVUE™ is not accessible the first time you install the battery to the
Mobile Computer. You need to power on the Mobile Computer first before
SnapVUE starts to operate in instant-on mode. After that, SnapVUE is always
accessible even when the power is turned off.
Note To always keep SnapVUE in instant-on mode, do not remove the battery from
your Mobile Computer. If you remove and reinstall the battery, you need to
start up the Mobile Computer in Windows Vista® first before you can access
SnapVUE mode.
To access SnapVUE mode
• Press the SnapVUE button.
SnapVUE
button
Set up the data connection
A data connection must be set up so that you can access the Internet and
download the latest weather information, synchronize information with the
Exchange Server, and send and receive e-mails in SnapVUE.
The Connection Setup wizard automatically sets up the data connection
based on your USIM/SIM card. If you have not yet inserted a USIM/SIM card,
see Chapter 1 for instructions on how to insert it into the Mobile Computer.
To automatically set up the data connection
1. The first time you use SnapVUE, the Connection Setup wizard displays
a notification message to inform you that it will automatically
configure SnapVUE with the proper network settings of your wireless
service provider. Tap Yes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
