HTC Shift User Manual

Getting Started 29
1.6 Inserting a Memory Card
On the right side of the Mobile Computer, there is an SDIO slot that mainly
serves as an SD memory card reader. If you have a digital camera’s SD card,
you can view and copy photos and other media from your SD card onto the
Mobile Computer.
When inserting your SD card, make sure to insert it with the contacts facing
down and the cut-off corner directed toward the slot.
Note To remove the SD card, press the card to pop it out of the slot.
1.7 Powering On the Mobile Computer for
the First Time
After inserting your SIM card and battery and charging the battery to full
charge, you can power on and set up your Mobile Computer.
Turn on the power
1. On the right side of your
Mobile Computer, slide the
POWER/HOLD switch to the
right for 1 to 2 seconds and
release.
2. The Mobile Computer starts up and runs the Power On Self Test
(POST). The POST is a series of built-in diagnostics performed by the
BIOS in the Mobile Computer when it is started.

HTC Shift Specifications

General

Display diagonal	7 \
Display resolution	800 x 480 pixels
HDD capacity	40 GB
ROM capacity	128 MB
Internal memory	1 GB
Internal memory type	-
Compatible memory cards	SDIO
Built-in processor	A110
Processor frequency	0.8 GHz
RFID reader	No
Product color	Gray
Phone function	Yes
Keyboard layout	QWERTY
Bluetooth version	2.0+EDR
Networking features	IEEE 802.11 b/g
Operating frequency	850/1900/2100, 850/900/1800/1900 MHz
Rear camera resolution	640 x 480 pixels
Speakers	stereo
I/O ports	1x VGA out
Interface	USB 2.0
Headphone outputs	1
Standby time	240 h
Battery capacity	2700 mAh
Battery life (max)	- h
AC adapter input voltage	90 - 265 V
AC adapter output current	3 A
AC adapter output voltage	12 V
Manageability features	Left/right mouse buttons, microPad

Weight and Dimensions

Depth	129 mm
Width	207 mm
Height	25 mm
Weight	800 g