Operating in SnapVUE™ 63
3.3 Date, Time and Alarm
The Home screen displays the current day, date and time. If you have
enabled the alarm for the current day, the Home screen also displays an
Alarm icon right beside the time display.
Alarm icon
The date and time are synchronized with Windows Vista® and cannot
be changed in SnapVUE mode. If you need to change the date and time
settings, you can do so in Windows Vista®.
Set the alarm
There are at most three alarms that you can enable. Each alarm can be
configured independently with different settings.
1. Tap Settings on the Home screen and then tap Alarm.
2. Three Alarm tabs appear at the bottom of the Alarm Settings screen.
Tap the Alarm 1 tab.
3. Select the Alarm 1 check box.
4. By default, the alarm is set for all seven days of the week. If there are
certain days that you don’t need the alarm, tap the days when you
want to disable the alarm.
5. Tap the Up/Down arrow to set the time for the alarm, and choose
between AM and PM.
6. Select the type of alarm you want. Choose one of the following:
• Show reminder only. Displays a pop-up notification message
without sound.
• Play sound once. Sounds the alarm once.
• Play sound repeatedly. Sounds the alarm repeatedly until you
dismiss the alarm.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
