You can only open and use one app at a time. Your headset will prompt you to close the
current app before launching another app.
Viewing your surroundings
You can turn on passthrough mode to view your physical surroundings while using your headset.
§ To turn on passthrough mode, press the headset button twice. The front headset LED will
breathe red.
§ To turn off passthrough mode and return to VR, press the headset button twice again.
You can also turn passthrough mode on or off by pressing the VIVE button on the right
controller twice.
Cleaning and disinfecting VIVE XR Elite
Here are a few tips to help you keep VIVE XR Elite clean and hygienic.
Do's
§ Dampen a cloth with a neutral, non-acidic cleaning solution and use it to wipe the hard
surfaces of the headset and controllers clean, especially places you frequently touch with
your hands.
§ Using a UVC cleaner is an effective and recommended way to decontaminate VR headsets
and controllers. Before using a UVC cleaner on your VR devices, make sure to properly
cover the headset lenses. Discoloration due to UV exposure is not covered by warranty.
Don'ts
26 Getting started
To Next Page
Loading...
Need help?
General
