9. If there's a system update available, make sure to install it to get the latest features and
enhancements.
After installing the system update, tap Restart in VIVE Manager to restart the headset.
10. On the Get in focus screen, tap Confirm. Then put on your headset and continue with
setup.
Follow the instructions in the headset to adjust the diopter dials, IPD, and volume, and
define your play area. You can also refer to the following topics:
§ Adjusting the diopter dials on page 17
§ Adjusting the IPD on the headset on page 20
§ Setting up your play area on page 21
To learn more about VIVE Manager, see About VIVE Manager on page 39.
Adjusting the diopter dials
Adjust the diopter dials to get a clear, sharp view in VR.
Glasses won't fit inside the headset. If you wear glasses, remove them first before putting on
your headset.
1. Take off your headset.
2. Remove the face cushion. For instructions, see Removing and reattaching the face
cushion on page 19.
3. Set both diopter dials to 0.
4. Put your headset back on.
17 Getting started