Managing screenshots, files,
and apps
Taking screenshots and screen recordings
You can capture screenshots and record videos of what you're viewing on the headset so you can
share or view them later. Your headset also allows screen capture and recording in passthrough
mode.
To enable screen capture and recording in passthrough mode, go to Settings, select
Advanced Camera settings, and then turn on Allow passthrough recording and
casting.
Use the following methods to capture screenshots or record videos:
Method
Steps
Capture a
screenshot
Do either of the following:
§ Press and hold the headset button and Volume down at the same time
until the screen is captured.
§ Press the VIVE and trigger buttons on the right controller at the same
time.
Record your
screen
Do either of the following:
§ Press the headset button and Volume up at the same time to start
recording. Press them again to stop recording.
§ Press the VIVE and grip buttons at the same time to start recording.
Press them again to stop recording.
Capture a
screenshot or
record videos
with a timer
1. Open the VIVE Menu. To find out how, see The VIVE Menu on page 24.
2. Select to take a screenshot or select Start recording to record
your environment. The headset will take the screenshot or start capturing
video after a 3-second delay.
3. To stop screen recording, open the VIVE Menu again, point to the record
button, and then select Stop recording .
31 Managing screenshots, files, and apps
To Next Page
Loading...
Need help?
General
