To Next Page

To Previous Page

Pairing Bluetooth devices

You can pair Bluetooth devices such as headphones, keyboards, and other accessories with your

headset.

Make sure your Bluetooth device is nearby and in pairing mode. Here's how to pair your

Bluetooth device with the headset:

1. From Home, select Settings.

2. Select Connectivity.

3. Select Bluetooth.

4. Turn on Bluetooth and then select Pair new device.

5. Select the Bluetooth device you want to pair with your headset.

6. If your device uses a PIN or code, type the PIN or verify the code.

Paired devices will be listed on the Bluetooth screen.

§ To disconnect a device, select the device name and then select Disconnect.

§ To unpair a selected device, select Forget.

Setting up and using Kiosk mode

With Kiosk mode , you can limit users to access only certain apps and settings on your headset.

This is helpful for demonstrations, training, or certain enterprise environments where full control

of the headset might not meet organizational needs.

Here's how to set up and enter Kiosk mode:

1. From Home, select Settings.

2. Select Advanced

Kiosk mode.

3. Set a passcode, choose apps, and choose the settings appropriate for the Kiosk mode

session.

4. Select Enter Kiosk mode to start Kiosk mode.

To leave Kiosk mode, press and hold the headset button to open the Power menu, and then

select Quit Kiosk mode. Enter the passcode if you have one.

57 Settings

Questions and Answers:

Need help?

Do you have a question about the HTC VIVE XR ELITE and is the answer not in the manual?

HTC VIVE XR ELITE Specifications

General