Casting the headset to your phone
You can use VIVE Manager to cast the headset to your phone.
§ Screen casting in VIVE Manager requires Android 9 or later, or iOS 12 or later.
§ Before launching VIVE Manager, turn on your phone's Bluetooth
®
and Wi-Fi.
§ Make sure to pair VIVE Manager with your headset if you haven't done so. For details, see
Pairing VIVE Manager with a new headset on page 40.
1. Launch VIVE Manager on your phone.
2. Tap the Devices tab.
§ If VIVE Manager is not connected to the headset, tap Connect.
§ Because the headset's display must be on for VIVE Manager to cast content, put on the
headset before starting the casting session.
3. In the upper right of the VIVE Manager screen, tap the cast button to start the casting
session.
VIVE Manager will display a message showing that it's connecting to the headset.
If this is your first time casting the headset to an Android phone, you'll need to select
Accept
in the Invitation to connect dialog box that appears in the headset.
The headset's screen will then be displayed on your phone in landscape orientation.
4. During the casting session, you can use the following controls:
Control
Description
Stop casting
Capture screenshots
Capture screen recordings
Reset view
§ If the controls don't appear, tap the phone screen to display them.
§ Captured screenshots and screen recordings will be saved to your phone's internal storage
under Download\ViveManager (Android) or On My iPhone\VIVE Manager (iOS).
45 Sharing and streaming content
To Next Page
Loading...
Need help?
General
