NOTE
If the spring latch is too tight to move down, you can use a flat-head screwdriver to hold down the spring
latch during the installation.
----End
5.3 Installing a 60 W AC Power Module
Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
Make sure the following prerequisites are met before the installation:
l The DIN rail has been secured in position.
l The 60 W AC power module is placed near the DIN rail for convenient movement.
Tools and Accessories
l ESD wrist strap
l Phillips screwdriver
l M3 screws
l DIN rail
l 60 W AC power module
NOTE
The 60 W AC power module is not included in the installation accessory package and needs to be purchased
separately.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94
To Next Page
Loading...
