Huawei AR Series - 4.8.6 Connecting Power Cables

CONSOLE
RESERVE FE0
RST
L1 L2 L3 N
A
RS485-0
BA
RS485-1 DI-0 DI-1
B
GE0
RX TX
GE1
MONITOR
RX TX
FE2 FE4
FE1 FE3 FE5
FE6
Power outage Survival
FE7
Optical fiber
Remote optical interface
Step 5 Arrange the optical fibers to make them parallel and bundle them with fiber binding tape at an
interval of 150 mm to 300 mm.
Step 6 Replace all the temporary labels with formal labels on the optical fibers.
----End
4.8.6 Connecting Power Cables
Connecting 4-pin AC Power Cables
Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
NOTICE
Do not power on a router before you finish installing the router and connecting cables.
The power cable length must be shorter than or equal to 3 m. Table 4-4 lists the required
specifications of the power cables.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76