Huawei AR Series - 3.5 Installing a SIM Card

----End
3.5 Installing a SIM Card
Context
NOTICE
l A router must use Huawei-certified SIM cards. Non-Huawei-certified SIM cards cannot
ensure reliability and may affect service stability. Huawei is not responsible for any
problem caused by the use of non-Huawei-certified SIM cards and will not fix such
problems.
l SIM cards are not hot swappable.
Tools
l Phillips screwdriver
l SIM cards (separately purchased)
Procedure
Step 1 Use a Phillips screwdriver to loosen the screw on the SIM card cover, and remove the SIM
card cover from the router. Keep the SIM card cover in an appropriate place for later use.
Step 2 Push the SIM card holder toward the OPEN direction and turn it upward. Place the SIM card
into the SIM card slot, close the SIM card holder, and push the SIM card holder toward the
LOCK direction. When you hear a click, the SIM card holder is locked.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20