Huawei AR Series - 5.6 Connecting the Router; 5.6.1 Connecting the Ground Cable

~100-240
V
50/60
Hz 3
A
12 V 2.1 A
;
OUTPUT
0
IN
OUT
NOTE
If the spring latch is too tight to move down, you can use a flat-head screwdriver to hold down the spring
latch during the installation.
----End
5.6 Connecting the Router
5.6.1 Connecting the Ground Cable
Context
NOTICE
l The ground cable of a router must be correctly connected to protect the router against
lightning and interference.
l Do not power on the router before you finish connecting cables.
Tools and Accessories
l Phillips screwdriver
l ESD wrist strap
l Ground Cable
l M6 screw (separately purchased)
Procedure
Step 1 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 2 Connect the ground cable.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100