Huawei AR Series - 3.4 Scenario 4: Installing the Router in a Meter Box

Step 5 Slowly push the router toward the DIN rail to make the spring latch near the bottom of the
DIN mounting kit move down. The spring latch then bounces back to fix the router on the
DIN rail.
NOTE
If the spring latch is too tight to move down, you can pull down the spring latch during the installation.
----End
3.4 Scenario 4: Installing the Router in a Meter Box
Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
Make sure the following prerequisites are met before the installation:
l The DIN rail has been secured in position.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17