Huawei AR Series - 5.6.5 Connecting Boolean Output Cables

To Next Page

To Previous Page

Step 4 Remove the dust caps from the fiber connectors. Connect one end of the optical fiber to the

optical module and the other end to the remote device.

NOTE

Connect the receive and transmit ends of the fiber connector according to the identifiers on receive and

transmit bores of the optical module. Do not connect the two ends reversely.

5VZOIGRLOHKX

8KSUZKUVZOIGROTZKXLGIK

Step 5 Arrange the optical fibers to make them parallel and bundle them with fiber binding tape at an

interval of 150 mm to 300 mm.

Step 6 Replace all the temporary labels with formal labels on the optical fibers.

----End

5.6.5 Connecting Boolean Output Cables

Context

DANGER

To avoid electric shock, do not connect power cables while the power is on.

Huawei AR500&AR530&AR550 series Industrial Switch

Routers

Hardware Installation and Maintenance Guide

5 Installing an AR550 Series Industrial Switching Router

Issue 05 (2015-12-01) Huawei Proprietary and Confidential

107

Other manuals for Huawei AR Series