~100-240 V 50/60 Hz 3 A
12 V 2.1 A
;
OUTPUT
0
IN
OUT
12 V 2.1 A
;
OUTPUT
VOT*)VU]KXIGHRK
Step 5 Assemble the AC power cables.
NOTE
l The power cables are connected to the AC input terminal block in the same way. The following
procedure uses one cable as an example.
l Insert the three cables into the AC input terminal block from left to right in the sequence of live wire
(RTN(+)), neutral wire (NEG(-)), and earth wire.
1. Use a wire stripper to peel about 7 mm length of insulation coating off one end of the
cable.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
To Next Page
Loading...
