Procedure
Step 1 Use a measuring tape to determine the two mounting bracket installation positions. Keep the
two positions on a horizontal line and mark the positions with a marker.
NOTE
The center distance between the two mounting holes for the mounting bracket is 88 mm.
Step 2
Use a Phillips screwdriver to fix the mounting bracket on the rear of the router with four
countersunk M3x6 screws.
Step 3 Mount the router on the wall.
1. Use the Phillips screwdriver to install two M4x8 pan head screws in the marked
positions on the wall, and leave 2 mm of the screws out of the wall.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
To Next Page
Loading...
