Step 2 Secure the mounting bracket on the wall.
1. Adjust position of the mounting bracket to align the mounting holes on it with the four
marked positions on the wall.
2. Use four M4 self-tapping screws to secure the mounting bracket on the wall.
Step 3 Align an M4x20 screw with the topmost tapped hole on the mounting bracket, and screw it
about 5 mm into the tapped hole with a Phillips screwdriver.
Step 4 Use two M4x20 screws to fix the stainless steel sheet on the router.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
To Next Page
Loading...
