1. Insert the AC input terminal block to the AC input socket of the 180 W PoE midspan,
and then tighten the slotted screws at both ends of the terminal block with a flat-head
screwdriver.
2. Connect AC cables at the other end to an external AC power supply system.
~100-240 V 50/60 Hz 3 A
12 V 2.1 A
;
OUTPUT
0
IN
OUT
6U]KXY[VVR_Y_YZKS
Step 5 Connect a PD to the router.
1. Connect a network interface of the router to an input GE interface of the 180 W PoE
midspan using a network cable.
2. Connect an output GE interface of the 180 W PoE midspan to the PD using another
network cable.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
84
To Next Page
Loading...
