Cable outlet panels for electrical interfaces and optical interfaces are provided to suite
interfaces on the AR530 series routers.
Figure 4-1 Cable outlet panel for electrical interfaces
Figure 4-2 Cable outlet panel for optical interfaces
Step 2 Push the cable outlet panel along the rails to fix it on the plastic panel of the router. Arrange
the cables and route them through the uncovered outlets.
NOTE
4-pin AC power cables and 2-pin DC power cables are routed through the same outlet.
Step 3 Check all the external cables to ensure that they are routed out from the planned outlets.
Install the front top cover back to the router, tighten screws on the cover, and cover the screws
with plastic caps.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
To Next Page
Loading...
