Huawei B890 Online Help

HUAWEI B890 4G LTE Smart Hub
Online Help
Issue 01 (2013-02-05)
7
Step 2 Click the button to enable or disable the WLAN.

Turn On: to enable the WLAN.

Turn Off: to disable the WLAN.
----End
Follow-up Procedure
When WLAN is turned on, you can view the current WLAN status in the table below.
3.3 Viewing the WAN status
You can view the Wide Area Network(WAN) related parameters in this page.
Procedure
Step 1 Click Connection > WAN Status.
Step 2 View the

Network type

Bandwidth

Service status

IP Address

Primary DNS server

Secondary DNS server

and more......
----End
3.4 Viewing the LAN status
You can view the Local Area Network (LAN) status.
Procedure
Step 1 Click Connection > LAN Status.
Step 2 View the LAN status.

LAN MAC address

WLAN MAC address

IP Address

Subnet mask

DHCP server

Start IP address

End IP address

Huawei B890 Specifications

General

Brand	Huawei
Model	B890
Category	Gateway
Language	English