Huawei B890

HUAWEI B890 4G LTE Smart Hub
Online Help
Issue 01 (2013-02-05)
41
13 Maintenance
13.1 Configuring the LOG
You can enable the log service from this page.
Procedure
Step 1 Choose Maintenance > Log.
Step 2 Select Enable to enable the service.
Step 3 Configure the parameters as follow:

Log level: You can select Error, Warning, or Notice as required.

Log server: Select Enable or Disable.

Primary log server address/ Primary log server port/ Secondary log server
address/ Secondary log server port: Enter the address and the port. These
parameters provided by your service provider.
Step 4 Click Apply for the settings to take effect.
----End
13.2 Viewing the LOG
This page displays the log content at the current level.
Procedure
Step 1 Choose Maintenance > Log View.
Step 2 Select a value for Log level.
Step 3 Click Apply to view the LOG information.
----End